Regulators – basic buying tips for new divers

Bob Grundmeyer

Of all pieces of gear related to scuba nothing creates more buzz and excitement than the purchase of a new scuba diving regulator. Every other item a diver uses can be compared to something in another sport. Fins compare to skis

or snowshoes, and wetsuits and dry suits compare to clothing for any number of activities. Masks compare with goggles for skiing, paintball or motocross. Even our bcd can compare to a life jacket and even to some degree a parachute. But the regulator is fairly unique. Its features and operation is one of the most misunderstood functions in the entire sport.

Often the regulator is the subject of some of the most opinionated debates scuba has to offer, although the vast majority of the time the 2 people arguing over which regulator is best and why don’t have the slightest idea what they are actually talking about! Their particular favorite is “best” because some magazine was paid to say so, or better yet, because their scuba instructor, who they have been taught to believe is a diving deity worthy of worship, dives with that particular regulator or brand of gear. Little do they know that all too frequently that same scuba instructor doesn’t know any more about equipment than they do! In the next few paragraphs we are going to try to clear up a great deal of the confusion surrounding regulators and offer you the knowledge to make an informed decision on what piece of gear is best suited for you.

Oceanic GT3/CDX5 regulator

One of the first things that comes up when the sales person in your local dive shop starts talking about regulators is whether or not the regulator is balanced. And unfortunately much of the time this is where the diver is lost, their eyes glaze over and they begin the smile and nod routin,e being afraid to sound like they don’t know what they are talking about. The conversation has just started and we’ve already lost the customer. Fear not, because all too frequently the sales person doesn’t know what they are reciting actually means either.

The 1^st Stage

Most all regulators today come in 2 main parts or “stages”, and both can be

balanced or unbalanced. To make matters worse, while the end goal is the same when you balance either part, how it is accomplished and the reason for it is different for each. Let’s begin with a description of what each stage does and then break down the differences between the variations of each, starting with the 1^st stage.

The 1^st Stage is the part of the regulator that attaches to your tank. It is commonly made of chrome plated brass but can also be made from other materials such as titanium or with a combination of metals such as Monel, Zirconium or Stainless Steel. Titanium generally only serves to make the regulator lighter in weight (as well as more expensive) which can be a handy feature in your travelling luggage. Other than that, keep in mind it’s getting attached to a cylinder weighing approximately between 30 and 40 pounds. The little bit of weight you save on your regulator becomes pretty negligible at that point. Each of the various other metals has a different use or function, but for the average, first time, regulator buyer this article is geared towards, the normal, common brass first stage is cost effective, reliable and will give years of service.

The function of the 1^st Stage is to break down the high pressure air stored in your scuba cylinder to an “intermediate pressure” and send it down the various hoses for use. In most regulators this is somewhere between 130psi and 150psi and is nothing you need to ever concern yourself with unless you are certified as a regulator technician and working on equipment. With the original 2-stage regulators the 1^st Stage was unbalanced. What this means to you the diver is very simple. This type of 1^st Stage is reliable and dependable like that old, beat up pick up truck many of our grandfathers had. Nothing fancy or flashy, it took abuse and neglect but it started and ran every single time it was needed without fail.

A basic un-balanced first stage

With an unbalanced 1^st Stage, due to basic engineering limitations and physics, the deeper the diver goes the more difficult it is for the piece of gear to do what it was designed to do. At approximately 60 feet of depth the diver might notice a drop off in performance. Breathing will become increasingly more difficult the deeper the diver uses the regulator. The diver will also notice this same occurrence with lower tank pressures as the 1^st stage is designed with high pressure from your tank in mind first and then given the ability to continue working at the lower pressure or deeper depth. The lower the tank pressure, the less force placed against the internal parts of the regulator, which in turn means a lesser amount of air flowing through the inner workings. None of this means this type of 1^st stage is a poor choice. I’ve been to the very limits of the recreational dive planner many times using this type of regulator, safely and comfortably. An example of regulators using this type of first stage would be the Aeris A1 Regulator.

The Balanced 1^st Stage mechanically compensates for lower tank pressures and deeper depths. It is designed with ease and comfort in mind to offer the

A common balanced regulator first stage

diver the same breath of air from the beginning of their dive, to its most extreme depth as well as all the way to the end of the dive with a very low tank pressure remaining in your cylinder. It is equally as reliable as the unbalanced version, but does use a few more internal parts to perform its task.

So, is one better than the next? Yes and no. They both do the same thing for you; only one does it with more comfort. Compare it to cars. A Kia and a Cadillac both get you to the grocery store or on your trip where ever you may go reliably, only one does it with a lot more comfort than the other and over the long run would be a more pleasant way to go.

Another thing you may hear is the 1^st Stage being DIN or Yoke. This one is generally a non-issue as well. 99% of the cylinders you use on a vacation or

A common DIN First Stage

out of a rental department will have a yoke or standard valve (aka “K-Valve”). Chances are highly probable this is the same type of 1^st Stage you were trained on. DIN stands for Deutsches Institut für Normung eV (German Institute for Standardization; similar to US ANSI) A DIN 1^st Stage will be used specifically for tanks equipped with a DIN Valve. These valves are used primarily on higher pressure cylinders. At one time you’d find them almost exclusively on tanks with a pressure rating of 3500psi or greater. The past few years the DIN Pro valve has been getting a great deal more popular. This is a valve rated for the more common cylinders on the market, frequently using pressure ratings less than 3500psi. With the use of a screw-in insert this type of valve can be used for both DIN and Yoke 1^st Stages. In a nutshell, if you need a DIN 1^st Stage, you’ll know it, thus making this something you generally need not be concerned with.

You’ll notice that they both have several Allen Head screws or “port plugs”. These are where various necessary pieces of equipment will attach, such as your Safe Second Stage or “octo”, your low pressure inflator hose for your buoyancy compensator and your gauge or computer console. Frequently you’ll have an additional low pressure port (the smaller one) that will allow a dry suit user to have an inflator hose for the bcd as well as for their suit, or possibly an additional high pressure port allowing for variations in configuring your gear. Unless you have some specialized need for a specific number of ports, this is generally not something to give a second thought to. Every scuba regulator will come with at least the necessary number of ports for the most common, basic set up of your equipment.

Other terms commonly heard when discussing a first stage would be a “piston” or a “diaphragm” design. For the average recreational diver this is nothing they need to concern themselves with. They are simply different mechanical methods of meeting the same goal in a balanced 1^st stage. The differences are really only applicable to the maintenance technician in your local dive shop unless you have a specific reason to prefer one over the other.

The 2^nd Stage

The 2^nd stage of your regulator is the part that a diver would keep in their mouth to breathe from. This too can be balanced or un-balanced and offer various adjustments for the diver. The unbalanced 2^nd stage is generally light weight and has no extra knobs or switches for the diver to deal with. The biggest advantage and selling point to the diver is that it is commonly very reliable and has very few parts that may need adjustment. It is pretty

simple in thought. When it breathes poorly, it’s time for it to be serviced. This is not to say you shouldn’t have your equipment serviced annually, as the manufacturers suggest, regardless of its performance. Just that through your year if you care for it as you are taught in your dive class, it’ll work without any concern on your part. Due to their durability and ease of servicing these regulators are commonly found in rental departments mated up to an unbalanced 1^st stage. The past few years the scuba industry has seen a few unbalanced 2^nd stages on the market that do offer an adjustment knob. This is a simple flow adjustment knob designed to offer a slight adjustment in how much air flows through to the diver. It works basically like the knob on a spigot. Open it and more air flows, close it and less flows. It gives the impression of allowing the diver to fine tune their breathing but does not compensate for depth or the diver’s position or attitude in the water during their dive.

The balanced 2^nd stage has a couple of purposes. First it compensates for the fact that based on simple physics the 1^st stage cannot perfectly

accomplish what it is designed to do. It helps give the diver an easy, consistent breath of air through out their dive. Secondly it allows the diver to “tune” the performance of the regulator to their liking often with the use of knobs and/or venturi switches. The adjustment knob seen on most balanced 2^nd stages allows the diver to increase or decrease the resistance of breathing on the unit. Basically it lets it breath easier or harder to your liking. The difference between this knob’s function and the unbalanced 2^nd stage’s knob is that this one will compensate for depth and surrounding pressure, keeping that consistent breath through your dive. Normally a diver will enjoy playing with this feature for a few dives, noticing the differences in resistance until they find their favorite spot and then they’ll never touch it again. The venturi switch is a simple flow restricting switch that makes the 2^nd stage less sensitive to free flowing when it is not in the diver’s mouth. This is handy any time the regulator is not being used such as beach entries, floating on the surface possibly awaiting other divers entering the water or while the diver awaits their turn to exit on a boat dive and such. It is a simple “de-tune” switch that usually simply redirects air flow in a manor that makes the unit less sensitive.

Inside the second stage can be various types of vanes or items installed to direct the flow of air within the second stage. They can have various uses all designed to help with the diver’s comfort. First they aid in ease of breathing and response of the regulator by causing a swirling effect within the second

stage. This vortex of air will cause the diaphragm to be sucked in with less effort, thus pulling a lever opening the valve within the unit that allows for the air from the hose to be delivered to the diver. Not a necessary feature, but a nice convenience for comfort. Most all 2^nd stages today have something built into them to perform this thus making it something to not worry about a great deal. Another unintended use for these vanes comes from the manufacturers that use metal in their construction. After a few breaths the metal will begin to develop condensation on it, allowing for a few comforting drops of moisture to be inhaled. While this isn’t enough moisture to combat the dehydration that works against us, it definitely makes for a more comfortable dive often eliminating the dry scratchy throat one can feel after breathing dry compressed air.

These are some the basics that the vast majority of divers need to give thought to when selecting the correct regulator for their uses. In the end it isn’t as complicated nor mysterious as the salesman behind the counter at you local dive shop would lead you to believe. Like with so many parts of scuba equipment, it mainly boils down to the level of convenience the diver wishes to purchase. But rest assured, no matter what you choose you can be comforted with the knowledge that your regulator was manufactured with your safety and enjoyment in mind and will offer you many years of service with some pretty basic care.